LCD TV connected to the computer related matters

Connected to a computer with VGA, no display screen or display is not compatible with the signal

    Set the computer back to the original display, set the resolution: 1024 * 768/1360 * 768 Hz: 60, after receiving the television reboot, check whether the startup screen.
    After the startup screen if no desktop display, it is recommended to restart your computer, press F8 to enter Safe Mode boot, choose VGA mode into the operating system to see if there is a desktop display.
    Such as connecting a notebook, proceed as 1) 2) The same operation as such did not reflect, shut down this screen, only the external display (television) as a display. (Closed notebook display methods vary depending on the brand, it is recommended to consult their notebook sale)

Connected to a computer with VGA, 1024 * 768/1360 * 768, can not be full screen

    Ask the user to confirm the input signal which is a resolution, refresh rate is the number of Hz?
    Our LCD TV for 1024X768 / 60Hz and 1360X768 / 60Hz need to manually adjust identification.

Make sure you enter the first resolution, and then adjust the TV to PC mode, go to Options → trimming → synchronization input signal within select the correct resolution, widescreen mode if the customer selection criteria, the television is not full screen, and only the WIDE select Full Screen will be full screen.

Connected to a computer with VGA, there are pictures and silent

Check to make sure the audio cable connection.

Connect a VGA port near the caliber of 3.5mm audio port for the mini stereo audio cable, generally commercially available.

After connecting a laptop, how to choose a single screen or dual display?

Consistent with the output of the switching mode, the function keys Fn + notebook corresponding output switching key (see your computer Owner's Manual), switch the display single screen or dual-screen.